09 Toyota Tundra Keyless Remote Programming
Key is out of the ignition.
09 toyota tundra keyless remote programming. May 4 2019 at 524 PM 10 10. PRESS and HOLD the ECUs Programming Switch for 3 seconds using a paperclip or small screwdriver. The drivers door open and unlocke.
Thanks NorthCoast Keyless for selling these units at a reasonable price. Complete these steps within 5 seconds. Remove the key from the ignition switch.
It only came with one keyless entry remote and I was able to buy another OEM off eBay pretty cheap. If they cycle twice repeat this Step again. The Status Monitor LED light will turn on for 5 seconds to indicate successful entry into Programming Mode.
This keyless remote programming instruction works on this 3B remote with part 89742-AE010 89742-AE011 and FCC id GQ43VT14T. A unlock the driver door with one push and the remaining doors with a second push OR B unlock all of the doors with a single push. Toms Key Company now open.
Repeat button procedure to program remaining remote transmitters. How to Program a 2009 Toyota Tundra Keyless Entry Remote Fob Smart Key Step by Step How to Programming Instructions. Open the drivers door.
Free Key Fob Remote Programming Instructions for a 2009 Toyota Tundra. Steps 2 and 3 should be performed within 40 seconds. 2003-2006 Toyota Tundra Regular Cab Dealer Installed Key Fob Remote FCC.