2000 Toyota Tundra Battery Light Reset Procedures

I have a 2000 toyota tundra v8 2wd pickup truck my check engine light came on and i got the codes it was reading p0155 so i changed both o2 sensors on the front side of the system.

2000 toyota tundra battery light reset procedures. So you will have to carry out the Tundra maintenance procedure. Tighten the cable back on to the terminal. I have a 2014 Tundra.

New Battery - Install new battery and prevent corrosion. Remove the Negative - Terminal from the battery first for safety reasons. How to Reset a Tundra ECU.

After replacing the battery I went to start the truck and now the airbag light is on. With the engine off you should get a reading somewhere between 120 volts and 126 volts. Remove the Positive Terminal from the battery.

So I drive it a quick mile or so and when letting off the gas the RPMs drop to 200-400 while going down the street. I get new battery and check engine light is on. Check engine light comes on after cat monitor is ready.

This is best done after any repair work to ensure the codes stay gone as. Now i am getting a. Now that you have a baseline its time to turn the engine on.

If you see your Tundras battery light turns on while the engine is already running that is a strong indication that the alternator is no longer providing enough wattage to power the various electrical systems and charge the battery at the same time. Hook one end of your test light to the Negative battery post. Couple stops later it did stall out and the Check Engine light Battery light and Oil light all came on.