2000 Toyota Tundra Upper Ball Joint

However the 2000 Tundra has not been recalled.

2000 toyota tundra upper ball joint. Nice truck Bri- looks. Upgrade your suspension system with more durable ball joints and components that can stand up the abuse. Step 1 remove front wheel and jack up the front using a floor jack at the cross member that located at lower swing arms.

The upper ball joint is riveted or bolted in. Fits 4Runner Sequoia Tacoma TundraWheel Hub - Repair or ReplaceA wheel Hub may need to be replaced if the wheel bearing in your Toyota is being serviced or if your ABS or Traction Control light is on. Only the 2002-2004 Tundras were recalled even though they have the same ball joints.

Using steering linkage puller loosen upper arm ball joint and knuckle nut. You will need a 35mm socket to remove the nut. Front Driver and Passenger Side Recommended Use.

You may find a 2000 Toyota Tundra lower ball joint replacement video or a 2006 Toyota tundra ball joint replacement video. Put the spindle back on using the jack if necessary and put the nut back on and tighten. ACDelco 89050154 - ACDelco Professional Ball Joints.

Toyota Tundra 2000 TTX Front Upper Press-In Non-Adjustable Ball Joint by Mevotech. Remove upper arm and upper arm shaft assembly. 2006 Toyota Tundra upper sealed for life ball joints both left and right started leaking from shaft where seal has allowed lube to escape therefore a failed ball joint.

Tacoma Tundra Ball Joint Removal- Slug Adapter Install Tools. While driving approximately 35 mph the lower ball joint separated from the socket and the lower a frame dropped. Inspection Using preload socket ensure breakaway torque for upper arm ball joint is 3-13 INCH lbs.