2003 Toyota Tundra Transmission Fluid Change

I have had 5 Tundras and have run them all to 100K or more.

2003 toyota tundra transmission fluid change. Pretty easy to do. Add the ATF WS transmission fluid through the refill plug hole. Then take your 14mm socket and loosen the drain plug on your transmission pan.

Drive to heat trans to op temp remove star screw at right side of tans pan lower rear portion if fluid drains its full. This video shows you how to add transmission fluid to your 2003 Toyota Tundra. Start by draining the fluid from the transmission pan by removing the drain bolt.

This product is made of high-quality components to meet and exceed strict quality requirements. Drive it and get it hot drain the pan put the plug back in pull the hose off the upper cooler outlet and replace it with the 38 hose. The transmission fluid capacity for the 2003 Toyota Tundra iS55 pints for the R150 RWD 46 pints for the R150F 4WD and 21 quarts for an initial fill or 13 quarts for a total fill for the 4-speed automatic.

He was amazed that he didnt have to add any oil. My tundra calls type IV automatic transmission fluid. Toyota put out a huge amount of TSBs around 98 basically switching most of their cars trucks over to this T-IV stuff including their 1982 truck.

Designed using state-of-the-art technology. But Toyota designed the transmission to not need a fluid change. The type of fluid that should be used is dexron-viAutomatic transmission fluid.

Youll need about 6ft of 38 hose about a 2 gallon container marked in quart graduations and 13qts of fluid. First make sure your Tundra is cool so the transmission fluid doesnt burn you. Complete video instructions to add transmission fluid to a 2002 Toyota Tundra SR5 47L V8 Extended Cab Pickup 4 Door.