2007 Toyota Tundra Dash Removal
Also this may be excessive some of the aforementioned may not need to come out.
2007 toyota tundra dash removal. Pull off that panel being careful not to damage any of the wiring behind it. Using a 2 Phillips screwdriver remove 1 screw from just behind the inboard drivers knee panel. Remove the three bolts nut and number one brace.
My 2007 Toyota Tundra 47l shows VSC OFF lights. TOYOTA TUNDRA Console Shift 2007-2011 TOYOTA SEQUOIA 2008-2011 1 1 Remove 1 Phillips screw from shifter trim panel and remove panel. Asked by bfulda in Manahawkin NJ on January 08 2010.
1-4 1 Remove 2 Bolts. Because the inlet tubes project through the firewall the unit will not fall straight down. Partially remove knee panel from lower dash on inboard side to gain access to Phillips screw located behind it.
It is off slightly. Remove storage tray from lower dash panel. Hey one more idea try searching for dash removal or instrument panel removal.
I am way too lazy right now to look it up but I have had my dash apart a couple of times from info on here. Lift up at the latch hole the entire thing up to the dash will lift up. With Panel removal Tool unclip gauge Panel slightly just enough to pull Radio out Do Not Remove 2.
Remove the bolt nut and number two brace. TTORA forum is the best Toyota off-road club around. RAM on our dash mount in the desired location.